Mbm-corporation 307A (PERF & SCORING UNIT) Bedienungsanleitung

OPERATION MANUAL for Scoring unit & Perforating unit A PRODUCT OF CORPORATION The Leader in Paper Handling Equipment 1-800-2

9 (1) Scoring Position Move V-Groove of Lower Scoring Roller to the place where scoring. Then, fix the Roller by Philips Sc

10 (4) Adjusting positions of Feed Rollers Place Lower Transport Rollers to the positions where both of them stay on the paper positively. Then, fix

11 Slide and move Lower Scoring Roller first, then slide Upper Scoring Roller. Make sure to fix both Rollers by Phillips Screw Driver af

12 4．Adding Perforation Unit (1) Remove Transportation Shaft from Perforation Unit (2) Remove a Phillips scre

13 (6) Place Transportation Rollers where they grip perforating sheet positively. The two Perforation Units should not touch each other.

14 5. Exchanging Perforation Unit to Scoring Unit. Perforation Unit can be exchanged to Scoring Unit and Scoring Unit can be exchanged to Perforat

15 (6) Place Scoring Block or Perforating Block as desired. The two Perforation Units, if any, should not touch each other. (7) R

16 6. Replacing Transport Rubber Ring (1) Remove Transportation Shaft from Perforation/Scoring Unit (2) Remove

17 (4) Remove worn/old Rubber Rings from the Lower Transport Roller. (6) Re-mount Lower Transport Roller in the r

18 7. Troubleshooting8. Specifications SymptomRemedy- Replace Paper Separator.- Replace Paper Feed Roller.- Remove jammed paper by removing Perfo

1 Before use Read this operation manual carefully before use. Keep this booklet handy for your reference anytime. Specifications are subject to chan

19 Intentionally left blank JaCIcOn

20 MBM Corporation

2 1. Name of Parts 1) Perforating Unit Block Mounting Arm Scale Perforating BlockBlock Fixing Kn

3 2. Preparation before use View after Perforating unit is mounted (1) Remove 1st Folding Table to the direction

4 3. How to use 3.1 Setting Perforating Block ((1) Loosen Thumb Screw and squeeze Release Levers with fingers

5 (3) Setting Paper Transport Rollers, Upper and Lower, at proper position Place the Paper Transport Rolle

6 (1) To activate Perforation Unit, turn on the Power Switch while pressing the SELECT Key. Release the Ke

7 3.3 Fine Adjustment of Perforating Line CAUTION: Before making any adjustment, make sure that the paper is

8 (1) While squeezing levers, loosen Thumb Screw and remove Perforating Block. (2) While holding Rubber Ring, loosen Fixing