Mbm-corporation 7228 cutter Bedienungsanleitung

- 1 -IDEAL 7228-95IDEAL 7228-95 LTOperating Instructions

- 10 -IDEAL 7228-9504-0167-03Multiple cuts function start- Enter the cut size on the display.- Press key.- Push the paper to the backgauge.- Releas

- 11 -3.4 False clamp plateA cover plate (39) can be fitted to prevent pressuremarks on sensitive material.To dismount:- Remove the clamp plate (39) b

- 12 -IDEAL 7228-9567-043.5 ProgrammingThe control system enables 20 programs with up to16 steps to be programmed. One step representsone measurement

- 13 -67Select Program- Press P © the red „S“ light will be on.- Enter desired program number 0 1...2 0.- Press S- Enter step number 0 1...1 6.- Or

- 14 -IDEAL 7228-9567Working with programs- Press P.- Enter desired program number 0 1...1 6.- Press © proceeds to position.- Insert the paper and pu

- 15 -05-0107DIN 894244. MaintenanceDanger!- Maintenance work may only be performed by trained staff.- Before replacing the blade or cutting stick

- 16 -IDEAL 7228-9505-0208-0125Turning or replacing the cutting stick- Turn the blade depth adjustment (27) to the topuntil it stops (spanner in tool

- 17 -05-02204021-0222-014.2 Blade replacementA reduction in the cutting quality indicates that theblade must be sharpened or a blade change isnecessa

- 18 -IDEAL 7228-9522-0121-0205-02Blade mounting- Turn resp. replace cutting stick © see „Cuttingstick replacement“.- Place the blade to be exchanged

- 19 -24-02264.3 Weekly Maintenance- The backgauge should be advanced.- Lubricate the grease nipple (32).Type of grease- Roller bearing grease - all t

- 2 -IDEAL 7228-95

- 20 -IDEAL 7228-9501-045. MalfunctionsDanger!Disconnect from the mains before startingany service work or before removing thecover.Malfunction:No dis

- 21 -Malfunction:Machine is switched on but cut cannot beperformed.Cause:Safety clutch is activated.Remedy:Contact your dealer.Malfunction:The last s

- 22 -IDEAL 7228-9516276. Technical dataSound level DIN 45635-27: max. 73 dB(A)Minimum space requirement B x T:without side tables 130 cm x 151 cmwith

- 23 -EG-KONFORMITÄTSERKLÄRUNGEC-declaration of conformityDéclaration de conformité CEDeclaración CE de conformidadDichiarazione CE di conformitàEG-ve

- 24 -IDEAL 7228-95IDEAL Krug & Priester 72336 Balingen Germany www.ideal

- 3 -Table of contents1. General ... 41.1 Safety Instructions...

- 4 -IDEAL 7228-951. GeneralThis instruction manual will help you to learn thesafe and comfortable operation of this machine.Please read these operat

- 5 -2. Installation- Transport the machine on the pallet to itsdestination using a pallet-jack.- 6 strong people are required to lift the machinefro

- 6 -IDEAL 7228-9501-0301-042.2 Power supplyThe name plate (23) is located at the rear of themachine.- Data stated on the name plate- Voltage “ V “,-

- 7 -04-0103-013. OperationDanger!The machine may only be operated by trainedpersons who have also read and understoodthe operating and safety instruc

- 8 -IDEAL 7228-9567-013.1 Operating elements (1) Safety two-handed control system (2) Backgauge control (3) Backgauge (4) Key switch (5) Main sw

- 9 -67-0206-01Calculating:e.g. 4 8 : 4 © Backgauge advances tothe calculated measurement.Cut according to markings- Position the backgauge (16) to